Removable translation into Russian in BIOS. Activating boot from a flash drive in the BIOS of different manufacturers.
Most often we recall the BIOS (Basic Input / Output System) only when we need to reinstall the operating system and need to somehow set the boot from the disk or flash drive. I often wrote about this in articles such as:, and others. Now I want to put together and refer only to this article if necessary. This article will be useful for all versions of BIOS and for different companies. A sort of single reference
Operating system pending
Basically, the operating system controls the input interfaces, such as the touch screen, keyboard and mouse. In addition, it provides easier access to computer components. In the "Program Library" section. As it is briefly said, it is now in the so-called waiting position along with the operating system and controls all input devices, as well as the clock in a constant cycle. If the user does not touch input devices, the operating system also does not perform any actions. If they are not monitored over time, for example, a screen saver, power saving mode, or regular virus scan.
The first thing you need to know is that the BIOS is broken down by manufacturer and version.
To change BIOS boot method - you must first enter it.
You can, of course, find out which version and manufacturer of your BIOS is from the manual that comes with the computer.
You can also find out by looking at the line at the top of the black screen at boot (the manufacturer will be indicated there).
Well, then enter the bios, knowing what it is with you.
How does email work?
Suppose, however, that the user touches the e-mail program icon with a finger on the touch screen or clicks on it. For example, with network card or hard drive. This is usually very difficult, and it is not recommended to reprogram any program that requires an email function or simple network connection.
What is a program library and how does it work?
Some of them know the so-called software libraries, which already have ready-made functions for audio output, network communication, access to the hard disk, printing, and much more. provide. It breaks the boundaries. Delivery within 1-2 workers days.
In some versions of the BIOS there is no such screen with a string display. There simply is a logo and below it says something like "Press F2 to enter SETUP" means and press F2. If it’s just a logo and there are no signs, press ESC, then del or f2
Here is a short list of manufacturers and keyboard shortcuts for entering BIOS:
Also, keys are written at the bottom of the black screen to enter the BIOS and to display a list that contains available devices for loading and so that you can boot from it. But about him at the end of the article.
Why doesn't the operating system offer all the features?
To deal with several examples of software libraries, for example, from a web browser browser. Due to the extensibility and programmability of computers and operating systems, the manufacturer operating system must weigh which products he would like to offer or deliver with the operating system and which he would like to sell separately or not at all. This is rarely a technical, not an economic issue.
When the program is completed, the memory is empty
Moreover, all modern operating systems have certain problems, which leads to the fact that after prolonged use, less and less main memory may be available. You will see it is very simple! Did the crab help you? Help him by turning off the ad blocker!
As you can see - most often you need to press a key F2 or Del.
Now you need to put a USB flash drive or disk into the download.
Let's look at a few examples that differ from the BIOS manufacturer.
Configuring Award Bios to boot from a USB flash drive or disk:
The main window is a view in which we need the second item:
Before getting to the bottom of the matter, it seems to me important to understand the principle of the seed order. If you are in a hurry or you are not interested, you can go directly to the next chapter. When you turn on the computer, the computer firmware launches the bootloader of the first device in boot order. The boot order is a list of devices on your computer, sorted by importance.
If no boot loaders are found on the first device, it moves on to the next and so on until you find a device with a bootloader. In some configurations, when you start your computer, you can see the characteristics of your video card. Then the computer firmware is loaded.
Further depends on the firmware version. In one case, you will need to go to the item similar to "Boot Seq & Floppy Setup"
in another case, you don’t have to go anywhere - everything will be right before your eyes
Method 1: through the Start menu
Or a manufacturer logo display motherboard or your computer’s computer. Whether you have one or the other, it comes down to the same. Have you chosen the solution that you like best? When the computer starts up, press the keyboard key associated with the start menu.
Method 2. Setting the boot order
The Start menu opens. Then it's simple: just select the device you want to boot from! Or a display with the logo of the manufacturer of your motherboard or your computer. However, you can still follow the directions that follow, they will certainly help you!
Clicks on First boot device (First boot device), click Enter and such a window will appear
in which you need to select the drive or flash drive that will be launched first. You can specify the Second boot device, for example, but usually the BIOS itself fills this data.
On a note:
If you select a USB flash drive, then, among other things, you need to go to the “Hard Disk Boot Priority” item and move our USB flash drive to the very top using the “+” and “-” or “PageUp” and “PageDown” buttons:
Scroll down to “First boot device” and press “Enter” to open the list of devices.
- It is required when you are not sure of the stability of your car.
- Optimized download by default.
- Download optimized options for your equipment.
- The update fixes the problem with your computer.
- An update improves the performance of your computer in the desired way.
It’s also worth remembering that in order for BIOS to see a flash drive, it must be connected before turning on or before rebooting
Then press “F10” (see the exact key in the tooltip at the bottom of the screen with the name “Save”, “Exit”) or go to the BIOS main menu and select “Save and Exit Setup”. In the red window, select "Yes" with the "Y" button on the keyboard and press "Enter"
Print this document. Select your computer’s operating system and click Submit. The web page lists the updates available for your computer. Click Download, and then when prompted, click Save As to save the file in a convenient location, such as on your desktop.
This is normal behavior. Close all open programs and temporarily disable antivirus software. software. Remember to reactivate the antivirus software after the update is complete. Connect the AC power adapter to the laptop. . Yes, you can. Follow the instructions below. What is a temporary mode?
Computer reboot and when booting from installation disk on Windows, you may be prompted for a few seconds, "Press any key to boot from CD or DVD ..."
Which translates as "Press any button to boot from a CD or DVD."
This means that if you do not press any button on the keyboard at that moment, the computer will continue to boot from the next device on the list.
Another variation of this BIOS:
I met this only on old computers ten years ago until 2003. The main menu looks like this:
If the computer does not start on the Login screen
None of boot programs does not start in safe mode. Which one to choose depends on whether the computer can start or not start on the login screen. Use the System Configuration tool.
If the computer starts up for the login screen
If your computer can start the login screen, follow these steps to select startup options to restart the system where you are going to select safe mode options.
To configure the boot order, go to the menu BIOS FEATURES SETUP:
At this point, we just select the PageUp and PageDown buttons (or Enter and arrows) to set the CDROM or USB flash drive first. Do not forget about the second and third device
And further:
If your computer does not start on the login screen
The system will restart in safe mode. Log in using your credentials. You will see the preliminary modes recorded in all four corners of the desktop. Click “reboot” if you want to immediately start working in safe mode or click “Exit without restarting” if you want to restart manually later. A dialog box will appear. . For this method. We must have a “recovery unit”. Therefore, it is always useful to create a “recovery unit” and save the first blows to the first disaster.
Next, go to the “Boot Device Priority”, go to the “1st Boot Device” and select from the list what you selected in the previous tab (that is, if a USB flash drive was selected in Hard Disk Drives, then you need to specify it. This is important! )
To boot from a CD / DVD disc, you need to select “ATAPI CD-ROM” (or simply “CDROM”) in this menu, while there is no need to go to the previous menu “Hard Disk Drives”.
Now we save the results with the “F10” button or go to the “Exit” BIOS section and select “Exit Saving Changes”.
Another AMI BIOSbut everything is clear here:
How to create a recovery disk? Make sure that the disk is correct before clicking the "Next" button to create a recovery disk. Follow the onscreen instructions. . The computer starts up with the recovery unit, and then follow these steps to start in safe mode.
As soon as you decide to install the installation media. When prompted by the system, press the Spacebar or any key on the keyboard. The computer starts from the inserted media. Click Command Prompt. Enter your password to start the computer using command line.
Configure Phoenix-Award Bios to boot from flash drive
If, entering the BIOS, you see such a screen, then you have Phoenix- Award BIOS:
We go to the “Advanced” tab and opposite the “First Boot Device” we set what we need (a USB flash drive or disk):
Now you will see a list of organized options in the sections displayed on the command line window. Type the following command at a command prompt. Right-click the Start menu and select Command Prompts from the list. Copy and paste the following commands into the command prompt window.
Select Safe Mode using the arrow keys on your keyboard. Copy and paste the following command. You can also write to me to support him. Then always check this requirement. This guide is divided into two separate parts.
Saved with F10
Configuring EFI (UEFI) Bios with a graphical interface for booting from a USB flash drive
Now you won’t surprise anyone. Almost all new computers come with a similar shell. You can read more about it in the article.
When loading, at the bottom of the screen there is a section "Boot Priority", where you can use the mouse (drag and drop) the pictures to set the desired boot order.
You can also click on the “Exit / Advanced mode” button in the upper right corner and select Advanced mode in the window that appears.
After creating the CD, restart the computer and install the boot from the CD. Explanation: The first record allows you to save the contents of a disk or partition, creating a subsequently restored image file. On the other hand, the second record allows you to “clone” a disk or partition to another disk or partition. Recommended hDD.
At this stage, we can choose one of several options. Then it will save the entire disk, creating a full image. Given the difference in options, select the first option or Saved. If multiple disks are installed on your computer, select what you want to create backup.
Next, go to the “Boot” tab and in the section Boot option priorities In the “Boot Option # 1” field, install the default boot device as a USB flash drive, DVD-ROM, hard drive, or other available device.
Configure saved image controls to ensure recovery is not a problem. This step may take several minutes depending on the size of the disk and the speed of the disk. The image below is just an example, and the values \u200b\u200byou see will be different, because this is just an example of a test, so the disk size is limited. The second part of the article. When the update is complete, your computer will reboot to boot the operating system from installed version drivers. Do not interrupt the update process. . Go to the page and follow the instructions to identify system errors on your computer and solve problems.
How to boot from a USB flash drive or disk without entering BIOS
This is what I wrote about almost at the very beginning of the article.
This is when you need to press a key once and a window appears with a choice of loading. This method does not change the BIOS settings.
Usually Award BIOS offers to press "F9" to call boot menu, and AMI asks to press "F8". On notebooks it can be the F12 key.
In general, look at the bottom line and look for items like “Press F8 for BBS POPUP” or “Press F9 to Select Booting Device after POST”.
Prices have also become really ridiculous. This article contains two video tutorials from prof. It is used to carry out the diagnostic tests necessary to verify the health of the hardware. In case of errors, the BIOS reports any malfunctions detected by sound signal. In addition, the BIOS is used to search for the operating system and load it into inoperative computer memory. The following video tutorial provides an example. Entering the BIOS, you must move using the keyboard arrows.
Read the instructions on the download page to indicate which keys to use for various tasks. On the download page, in general, there is a list of peripherals arranged from top to bottom. In fact, the computer will search for the operating system in the first list of devices, and if the hard drive is in the lead, it will find the operating system that will be launched without further research. A few lines down, you will find instructions on how to do this? If you make some mistakes and your computer no longer works, do not worry more than once: restart the computer and return to the BIOS, just load the default settings to just enter the key, usually After pressing the key, the initial settings will now be loaded, which should now be saved.
Why can’t I boot from a USB flash drive in the BIOS?
Possible reasons: 
On ancient computers, there is generally no way to boot from USB flash drives. If there is no newer BIOS, then the project can help.
1) Download from the link above latest version "Plop Boot Manager" and unpack.
2) There are files in the archive: plpbt.img is the image for the floppy disk, and plpbt.iso is the image for the CD.
3) We write the image to disk and boot from it (or from a diskette).
4) A menu will appear in which we select our flash drive and boot from it already.
Small decoding of drive designations when choosing:
Do not forget after you did what you wanted (namely, why you changed the boot in the BIOS) - return the boot settings back so that the computer boots from the hard drive.
